Heyco® Full Thickness Male Blades – Series 100, 110, 110-N, 110-E, 102-E, 116, and 116-N

NEMA 1-15P & 5-15P – .058″ Mold Line Thickness

For mating Female Cord Connectors, see click here.
For Male Ground Pins, see Male & Male Right Angle.
For Full Thickness Male/Female Combination Terminals, see 1186 Series & 1191 Series.

• All Heyco Full Thickness Blades pass UL 1659 crimp area test requirements.
• All Heyco Full Thickness Blades feature a 90° “knee” section for strain relief and assembly orientation. Exceptions: 116 and 116-N Series parts.
• All Flat Full Thickness, Non-Polarized Blades are front loaded for overmolding.
• All Polarized and 7-Shape Full Thickness Blades are side loaded for overmolding.
• Series 100 Polarized Blades feature a unique full wide/full narrow design i.e., for strength and appearance, both neutral (white wire) and hot (black wire) have straight sides.
• Series 110-N and 116-N Full Thickness Blades are notched to meet high temperature pull out requirements.
• Series 110-E and 102-E Insulation Crimp Blades provide strain relief and wire support for shock and vibration resistance, as well as support for insertion into the mold block. Series 102-E Blades are stamped with a carrier strip between blades. These parts accept a wider conductor range than the 110-E Series.
• Series 116 and 116-N Blades feature a larger crimp section for heavier 14-10 AWG gauge conductors.
• For strain relief protection, the 116 Series feature a flow-through hole below the mold line and 116-N blades are notched.
• DFARS Compliant

QuickSpecs

Materials		Alloy 260 Brass (70% Cu, 30% Zn. Higher Cu content resists dezincification)
Certifications		Recognized Component under UL File E164169
		Certified by the Canadian Standards Association File 91824
Standards		NEMA 1-15P & NEMA 5-15P