Heyco® Heavy Duty Male Blades for Range and Dryer

Part number and specification

PART DATA			PART NO.	APPLICATION TOOLING*				PDF
Type	AWG Range	Material	PART NO.	Die**	Feeds	Crimp Punch	Anvil	PDF
127 Series
.500 Range/Dryer Blade	10-6	Brass	6000	6000SXX5	Bulk	0V23	0V22
.500 Range/Dryer Blade	10-6	Brass	6004	6004SXX5	Dual	0V23	0V22
127-3 Series
.315 Range/Dryer Blade	10-6	Brass	6010	6010SXX5	Bulk	0V23	0V22
.315 Range/Dryer Blade	10-6	Brass	6012	6012SXX5	Dual	0V23	0V22
127-PAD Series - evaluated and approved by UL for use in UL817 applications
Padded Range/ Dryer Blade	12-8	Brass	6020	6020SXX5	Bulk	0V75	0V74
Padded Range/ Dryer Blade	12-8	Brass	6021	6021SXX5	Dual	0V75	0V74
127-90 Series
90° Range/Dryer Ground Blade	10-8	Brass	6002	6002SXX5	Bulk	0W83	0W82
		Brass	6005	6005SXX5	Left to Right	0V59	0V58
		Brass	6006	6006SXX5	Right to Left	0V46	0V45
127-90-SC Series - Small Crimp
90° R/D Ground Small Crimp	12-8	Brass	6007	6007SXX5	Bulk	0V92	0V90
128 Series
.500 R/D Line Blade	12-8	Brass	6015	6015SXX5	Bulk	0V41	0V40
.500 R/D Line Blade	12-8	Brass	6017	6017SXX5	Dual	0V41	0V40
128-3 Series
.315 R/D Line Blade	12-8	Brass	6016	6016SXX5	Bulk	0V41	0V40
.315 R/D Line Blade	12-8	Brass	6018	6018SXX5	Dual	0V41	0V40
128-PAD Series - evaluated and approved by UL for use in UL817 applications
Padded R/D Line Blade	12-8	Brass	6013	6013SXX5	Bulk	0V74	0V75
Padded R/D Line Blade	12-8	Brass	6014	6014SXX5	Dual	0V74	0V75
310-375 Series
.375 Line Blade	14-10	Brass	5950	5950SXX5	Bulk	0B95	0B94
.375 Line Blade	14-10	Brass	5951	5951SXX5	Dual	0W72	0W74
.310 Line Blade	14-10	Brass	6051	6051SXX5	Bulk	0AO3	05C8

* Use the Heyco Standard Applicator Die (indicated by “S” in the Die Part No.), click here.
** “XX” represents Wire Gauge. Please specify Wire Gauge when ordering.

Features

For Heavy Duty Ground Pins, see Male and Female

127 Series

Heavy Duty Terminal Blade.
30, 50, and 60 Amp rating.
Flag type construction for right angle
and straight thru plugs.
Conductor crimp ears only.
DFARS Compliant

128 Series

Shorter length and smaller crimp ears
than the 127 Series and thus lower
in cost.
Conductor crimp ears only.
DFARS Compliant

375 Series

a.k.a. “Travel Trailer” terminal blade.
30 Amp rating.
Flag type construction for right angle
and straight thru plugs.
Conductor crimp ears only.
DFARS Compliant

310 Series

Shorter in length and narrower than
375 Series.
20 Amp rating.
Flag type construction for right angle
and straight-thru plugs features a strain relief “knee” for added pull out protection.
DFARS Compliant

Padded HD Blades (“PAD”) versus Flat HD Blades:

Flat Heavy Duty Blades are front loaded for overmolding.
Due to their shaped profiles, Padded Heavy Duty Blades are side loaded for overmolding.
Heyco Heavy Duty Padded Blades are far less expensive than their Flat counterparts, yet they are functionally equivalent and evaluated and approved by UL for use in UL 817 applications.
DFARS Compliant

QuickSpecs

Materials	Alloy 260 Brass (70% Cu, 30% Zn. Higher Cu content resists dezincification)

Heyco® Heavy Duty Male Blades for Range and Dryer

Part number and specification

127 Series

127-3 Series

127-PAD Series - evaluated and approved by UL for use in UL817 applications

127-90 Series

127-90-SC Series - Small Crimp

128 Series

128-3 Series

128-PAD Series - evaluated and approved by UL for use in UL817 applications

310-375 Series

Features

For Heavy Duty Ground Pins, see Male and Female

QuickSpecs