Heyco® Male Pins - Series MP075, MP089, MP093, MP109 and MP122

Part number and specification

PART DATA				PART NO.	APPLICATION TOOLING*
Dia.	Overall Length	AWG Range	Material		Die**	Feeds	Tool Packs	Crimp Punch	Anvil
in.	in.	AWG Range	Material		Die**	Feeds	Tool Packs	Crimp Punch	Anvil
MP075 Series
.075	1.00	20-18	Brass	7010	7010UXX5	Left to Right	B300L/B301L	C229	C231
MP089 Series
.089	.75	20-18	Brass	7012	7012UXX5	Left to Right	B300L/B301L	C229	C231
MP093 Series
.093	.63	20-18	Brass	7002	7002UXX5	Left to Right	B300L/B301L	C229	C231
	.75	20-18	Brass	7000	7000UXX5	Left to Right	B300L/B301L	C229	C231
	.75	16-14	Brass	7008	7008UXX5	Left to Right	B304L/B305L	C230	C232
MP109 Series
.109	.63	20-18	Brass	7032	7032UXX5	Left to Right	B300L/B301L	C229	C231
	.75	20-18	Brass	7030	7030UXX5
	1.00	20-18	Brass	7034	7034UXX5
	.63	16-14	Brass	7049	7049UXX5	Left to Right	B304L/B305L	C230	C232
	.75	16-14	Brass	7047	7047UXX5	Left to Right	B304L/B305L	C230	C232

* Heyco high volume Application Tooling, designed for 3-5 ton presses - click here. Heyco Mini Applicators, designed for 1.5-3 ton bench top presses, are available - click here. ** "XX" represents Wire Gauge. Please specify Wire Gauge when ordering.

Features

For Mating Female Pins, Mating Female Pins with Insulation Crimp and Specialty Connectors.

Wide range of diameter and length combinations for 20 to 10 AWG conductors.
Folded Pin design saves material, reduces cost.
Hole behind crimp provides added strain relief, or can be cut-off on Assembly Equipment.
Conductor crimp ears only.
Available only in continuous strip form, regular (left to right) wind.
DFARS Compliant

QuickSpecs

Materials	Alloy 260 Brass (70% Cu, 30% Zn. Higher Cu content resists dezincification)

Heyco® Male Pins – Series MP075, MP089, MP093, MP109 and MP122

Part number and specification

MP075 Series

MP089 Series

MP093 Series

MP109 Series

Features

For Mating Female Pins, Mating Female Pins with Insulation Crimp and Specialty Connectors.

QuickSpecs