| DESCRIPTION | SPARE PART NO. | ||
|---|---|---|---|
| for 0022 R 29 Plier |
for 0030 R 30 Plier |
Drawing Ref. No. |
|
Part Type |
|||
| Grips | 0037 | 0047 | 1 |
| Pivot Screw | 0036 | 0046 | 4 |
| Nut | 0032 | 0032 | 5 |
| Spring | 0031 | 0031 | 6 |
Pliers are shipped set for a 1/4″ (6,4 mm) opening.
Pliers are shipped set for a 37/64″ (14,7 mm) opening.
These two Pliers will assemble the majority of our Heyco Original Strain Relief Bushings (see Specifications tab for alternate jaw openings). If adjustment is necessary, follow the instructions below:
A. Remove Nut (5) and Spring (6).
B. Close Pliers and lift off Movable Handle (1).
C. Move Jaw (2) to desired opening (see Specifications tab).
D. Reassemble Handle (1) in closed position so that the gear teeth engage.
E. Open Pliers and replace Spring (6) with short end in deepest recess, long end in Handle groove.
F. Replace and secure Nut (5).
![Loader](https://mlgg63gqdcko.i.optimole.com/cb:14oW.15e4f/w:auto/h:auto/q:mauto/ig:avif/https://heyco.com/wp-content/plugins/heyco-post-type-management/widgets/images/loader.gif")
